The Dräger X-am 5000 is the smallest gas detection instrument for up to five gases, which makes it perfect for personal monitoring applications. The practical mobile phone design is lightweight and easy to carry, and it provides reliable measurements for combustible gases and vapors, oxygen, organic vapors, and other harmful gases.

The MiniMAX4 employs patented SureCell™ sensor technology and Reflex™ cell check technique to detect and measure up to four gases simultaneously, including O2, CO, H2S and combustible gas. Operation is kept simple by offering only those functions required to comply with legislation. All routine, everyday functions can be achieved with the press of a single button, so training requirements are reduced. But don’t be misled. The MiniMAX4 still offers an impressive array of features.

The PHD6 Confined Space Multigas Detector has five sensor ports, up to six channels of detection, and 18 sensor options. The remarkable versatility means that the PHD6 can be used for nearly any application.

The X-am 7000 Multigas Detector reliably monitors oxygen, toxic and combustible gases and vapors in the ambient air. Three electrochemical sensors and two catalytic bead or infrared sensors detect the presence of up to five gases simultaneously and continuously. Over 25 different DragerSensors allows the X-am 7000 to detect and measure more than 100 gases and vapors.

The IAQRAE is designed to continuously monitor indoor air quality. Besides measuring temperature and humidity, it also includes a nondispersive infrared (NDIR) sensor for monitoring CO2 levels from 0-20,000 ppm with 10 ppm resolution.

Ensure that your X-am Gas Detector is powered properly.

The Cannonball3 Multigas Detector detects multiple gases in different combinations using user-replaceable sensors: LEL, O2, CO/H2S (using the Duo-Tox two-channel sensor), and SO2. Simple one-button operation and one-button calibration make the unit easy to use.

The Impact Multigas Monitor detects and displays measurements for up to four gases simultaneously. The Impact Series uses unique plug-in sensor cartridges, including high-specification flammable, oxygen and patented Surecell™ toxic sensors, to ensure safe, accurate and reliable measurements.

The PHD6 Confined Space Multigas Detector has five sensor ports, up to six channels of detection, and 18 sensor options. The remarkable versatility means that the PHD6 can be used for nearly any application.

The Honeywell X5 Portable Gas Detector can simultaneously monitor up to five atmospheric hazards. A wide selection of individual electrochemical toxic sensors is available, along with optional IR sensor for carbon dioxide and PID sensors for detecting VOCs.

The MultiVision Multigas Detector detects up to four gases: LEL, O2, CO and H2S. A large backlighted display shows detected levels, and a loud 92dBA alarm warns user when dangerous levels are detected. Simple one-button operation and calibration makes unit easy to use.

The small, tough and easy-to-use PhD Lite monitors up to four atmospheric hazards simultaneously using Smart Sensor technology. Specific sensors monitor LEL and O2, while a third sensor can be selected for the detection of CO, H2S (or both in combination) with the new dual channel CO/H2S sensor.

Ensure that your X-am Gas Detector and important accessories are protected and work properly when you need them the most.

The compact MultiPro Confined Space Gas Detector offers an exceptional array of features in a small, rugged instrument. The front-mounted, backlighted LCD display gives real-time readings of up to four gases simultaneously. Three user-replaceable sensors and up to four channels will monitor O2, LEL and either CO or H2S, or use the innovative Duo-Tox™ dual-channel sensor (two toxic gas sensors in a single sensor housing) to measure CO and H2S simultaneously, offering four channels of gas detection in the space of three, without any cross interference.

The PHD6 Confined Space Multigas Detector has five sensor ports, up to six channels of detection, and 18 sensor options. The remarkable versatility means that the PHD6 can be used for nearly any application.

The PHD6 Confined Space Multigas Detector has five sensor ports, up to six channels of detection, and 18 sensor options. The remarkable versatility means that the PHD6 can be used for nearly any application.

The Dräger X-am 2000 is the new generation of gas measurement instruments, which is adjusted to the requirements for personal monitoring.

The PhD5 Confined Space Gas Detector will detect and measure up to five atmospheric hazards simultaneously: oxygen, combustible gas, and up to three different toxic gases.

The PhD5 Confined Space Gas Detector will detect and measure up to five atmospheric hazards simultaneously: oxygen, combustible gas, and up to three different toxic gases.

The compact, reliable X-am 3000 is a 3- or 4-gas warning device that monitors combustible gas, O2, CO and H2S in ambient air. Precalibrated electrochemical sensors and the catalytic sensor are automatically recognized. All sensors are precise, reliable and show fast, accurate responses to changing gas concentrations.

Handheld MinMAX Gas Detectors help ensure that a working environment is safe and free of harmful gases.

The PHD6 Confined Space Multigas Detector has five sensor ports, up to six channels of detection, and 18 sensor options. The remarkable versatility means that the PHD6 can be used for nearly any application.

Compact yet full-featured, the QRAE Plus one-to-four sensor gas detector features advanced technology in a convenient, easy-to-use unit. Reliable plug-in smart sensors provide readings for combustible gas (0-100%LEL), O2 (0-30%), H2S (0-100ppm), or CO (0-500ppm).

The Lumidor Impact Pro IR Multigas Monitor detects and displays measurements up to four gases simultaneously and has infrared optical sensors which can also detect % LEL or % VOL methane and other hydrocarbons.

The small, tough and easy-to-use PhD Lite monitors up to four atmospheric hazards simultaneously using Smart Sensor technology. Specific sensors monitor LEL and O2, while a third sensor can be selected for the detection of CO, H2S (or both in combination) with the new dual channel CO/H2S sensor.

The QRAE II is a full-featured, compact, one- to four-sensor gas detector for detection of combustibles, oxygen, hydrogen sulfide, and carbon monoxide.

The MicroMAX Plus portable Multigas Detector monitors and measures up to five gases simultaneously, including O2, CO, H2S and combustible gases. Designed for 24/7 use in industrial environments, it offers reliable, continuous personal protection against these hazardous gases.

Enhance your Impact and Impact Pro Multigas Monitor with several available accessories.

The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. It is compatible with the AutoRAE Lite bump and calibration station and allows for STEL, TWA, low, and high alarms to be recorded.

The Dräger Pac 7000 is a compact single gas detector for personal monitoring at the workplace. Depending on which sensors are fitted, it can reliably warn of the presence of harmful concentrations of carbon monoxide, hydrogen sulfide or oxygen.

The ToxiLtd Single-Sensor Gas Detector is an affordable two-year disposable gas detector with an impressive array of features.

CMS is one of the most accurate and reliable spot measurement systems for determining gas and vapor concentrations. The system consists of an analyzer and substance-specific chips.

The ToxiPro Single-Sensor Gas Detector delivers an impressive array of features while remaining very affordable.

Get outstanding protection from gas hazards with economical, one-button convenience.

The PAC III® ambient-air monitor continuously measures toxic gases or oxygen deficiency and enrichment, then compares levels against user-configurable values. Sensors are field-replaceable and available to monitor over 30 toxic gases.

The rugged ToxiRAE PLUS PID is a personal pocket-sized photoionization detector that provides up to 10 hours of continuous monitoring of VOCs (volatile organic compounds).

The XD Single-Gas Detector is designed for use in the most rugged conditions. The Detector is IP66/67 rated, fully immersible, has an EMI/RFI resistant housing, and is housed in a built-in concussionproof boot.

The ToxiPro Single-Sensor Gas Detector delivers an impressive array of features while remaining very affordable.

The ToxiRAE II is a reusable single-gas monitor that costs little more than a disposable. It provides a continuous digital display of toxic gas concentrations for CO, H2S or O2.

The MiniMAX XP uses SureCell™ sensors with TempraSURE™ Thermal Shock Correction and Reflex™ Sensor Protection to provide excellent accuracy and reliability in the toughest work environments.

The ToxiLtd Single-Sensor Gas Detector is an affordable two-year disposable gas detector with an impressive array of features.

The small and lightweight Lumidor MiniMAX Pro is an easy-to-use single gas monitor that offers continuous personal protection against oxygen and other toxic gas hazards.

The MiniRAE 3000 is an extremely advanced handheld VOC monitor. It includes a photoionization detector (PID) with an extended range of 0-15,000 ppm that makes it ideal for industrial hygiene, leak detection, and hazmat detection.

The EntryRAE includes sensors that detect and measure O2, CO, H2S and combustibles, plus a photoionization detector (PID) for the detection of volatile organic compounds (VOC’s). The self-cleaning PID provides 0-999 ppm measurement of total VOC’s with 1 ppm resolution.

The MultiRAE IR combines plug-in “smart” toxic gas sensors, a nondispersive infrared (NDIR) sensor and a photoionization detector (PID) to detect and measure LEL, O2, H2S (or CO), CO2 and volatile organic compounds (VOCs).

The MiniRAE 2000 is a Photo-Ionization Detector (PID) 3-D sensor for detecting and measuring levels of volatile organic compounds (VOC). Operates over an extended range of 0-10,000 ppm with increased sensitivity and improved linearity.

The versatile MultiRAE PLUS can be configured from a simple, inexpensive O2/LEL monitor to an affordable four-gas monitor plus PID for total protection in toxic environments.

The ppbRAE is a handheld photoionization detector (PID) capable of true parts-per-billion (ppb) detection of extremely low level, low vapor pressure and highly toxic Volatile Organic Compounds (VOCs) like chemical warfare agents and pesticide residues.

Electrochemical (EC) sensors used in portable multigas detectors must be warmed up and allowed to reach an electrical stability to provide their best performance. An ammonia (NH3) sensor can take at least 24 hours to stabilize. A carbon monoxide (CO) sensor can be ready in 10 minutes, but in the presence of lethal CO, even that is too long. The SensorRAE Sensor Conditioning Station keeps EC sensors warmed up and ready to install into an RAE multigas detector at a moment’s notice.

Each Biosystems "Smart Sensor" is individually equipped with its own EEPROM memory chip. Besides storing information such as type, serial number and alarm settings, the chip also stores calibration adjustments and sensor-specific temperature compensation curves.