The 25mm, 0.45µm (±5.0µm) TEM Cassette is designed for asbestos final clearance testing. The cassette incorporate a 2" static conductive extension cowl and meets all applicable standards.

The M2 Multi-Mold Cassette is a disposable, two-sided sampling cassette for Indoor Air Quality (IAQ) sampling and analysis. Used with standard sampling pump and calibration equipment (not included), the M2 is a boon to both field and laboratory personnel.

This 37mm, MCE cassette is 0.8µm mixed cellulose ester and is specifically designed for lead sampling.

The high-quality PCM Cassette is a 25mm cassette with 0.8µm pore size for asbestos sampling. It incorporates a 2" cowl and meets stringent quality standards.

Diffusion Tubes sample ambient air by gaseous diffusion with no pumps or moving parts. Obtain time-weighted average (TWA) measurements of exposure to toxic gases for periods of up to 8 hours.

A wide selection of cost-effective Colorimetric Gas Detection Tubes provides fast, on-the-spot measurements of many gases and vapors.

For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases.

The Draeger Hot-Pack Holder and Hot-Packs allow the use of Draeger-Tubes below the temperature stated in their instructions.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The D-2 Moldite Sampler is a lightweight, low-maintenance, high-efficiency linear oscillating pump designed to sample air for mold, using all types of mold cassettes, as well as impactors.

Model LP-1200 is a precision, hand-operated piston pump for drawing gas samples into detection tubes.

The maintenance-free pulsating Diaphragm Pump provides reliable constant air monitoring in atmospheres that may contain dangerous particulates.

The accuro 2000 is a battery powered gas detector pump that is used in combination with the accuro pump allowing "hands-free" operation of the Dräger-Tube System.

The Clandestine Lab Simultest Kit is designed to detect the presence of the five dangerous gases most often encountered by law enforcement and first responders when they first enter the illegal laboratories used in the production of methamphetamine.

Use the HAZMAT Simultest Kit when initially assessing potentially hazardous situations, structural fires and organic chemical families.

Allegro’s Flow Meter is designed to be separate from the air sampling pump. This allows the user to use the same Flow meter to set the flow for more than one pump.