For use with Pressure Demand Full facepiece masks from Drager.

When attached to an Allegro Filtration Panel, the O2 Monitor Kit makes calibration a simple, automatic procedure.

The Remote CO Alarm is a portable system that uses a 50' cable, allowing workers to easily take the alarm into hazardous work areas.

The Portable Carbon Monoxide Airline Monitor plugs in easily to any Grade D airline manifold using the included adapters and monitors supplied air for CO content.

This portable monitor unit connects easily to any high or low pressure compressed air breathing source and monitors air for CO content.

Alerts workers of the presence of dangerous carbon monoxide levels with a 90 dB audible alarm and flashing strobe light.

Remote CO Monitor attaches to any air source or filter panel to help ensure a worker safety.

AirBoss Sentinel II is integrated into fire fighting SCBAs and handles all life support monitoring functions in one.

This calibrated breathing machine is designed to test SCBAs to make sure they are functioning correctly, critical especially for firefighters who need to be able to work at peak performance. Simply attach a fully assembled SCBA to the PosiChek3 test head, then choose the desired test.

The PSS 7000 is designed to provide firefighters with exceptional safety, comfort and durability.

Replacement Parts and Accessories allow for the easy upkeep and upgrading of the PSS 7000 SCBA.

Draeger's AirBoss® Evolution meets and exceeds the requirements of NIOSH and NFPA for self-contained breathing apparatus for fire fighting. This unit combines the latest pneumatics with a time tested harness and backplate assembly. Lightweight carbon composite backplate and kevlar/nomex harness form the backbone of the unit, The first stage reducer features a failsafe design and allows accessories to be added utilizing a simple U-pin arrangement. Customize the AirBoss Evolution to your departments needs now or easily add accessories later.

The AirBoss® PSS100 combines state-of-the-art pneumatics with innovative ergonomic design to provide performance, protection and reliability in an NFPA-compliant SCBA.

The Dräger BG-4 supplies the wearer with safe breathing air for up to four hours in IDLH environments. The BG-4 gives the user time in extended-duration missions. Time to target, time to get the job done and time to get back safely.

This high-performance industrial breathing apparatus is designed for workers who need protection from respiratory hazards in the workplace. The low-maintenance ProAir is reliable, comfortable and cost-effective.

The Dräger Super I-PASS II is approved to NFPA / NIOSH / MSHA standards. Highly visible and fully integrated into the AirBoss PLUS series of SCBAs, the Super I-PASS II is available in both a shoulder or waist mounted models. A stand a loan I-PASS is also available.

A compact and lightweight PAPR System that won’t get in the way of the worker wearing it.

The system provides a portable source of ambient air for one worker. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

Continuous Flow Supplied Air Respirators offer cost-effective respiratory protection in non-Immediately Dangerous to Life or Health environments.

The Half Mask Respirator has a low profile. Features an over-the-shoulder hose, collar clip and adjustable belt.

The system provides a portable source of ambient air for three workers. System comes complete with comfortable, half mask supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for two workers. System comes complete with comfortable, half mask supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for one worker. System comes complete with comfortable, half facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

Continuous Flow Supplied Air Respirators offer cost-effective respiratory protection in non-Immediately Dangerous to Life or Health environments.

The hip-mounted PAS Colt SAR features a 5- or 10-minute self-contained air cylinder for emergency escape use. The cylinder is used simply by opening the cylinder valve.

The system provides a portable source of ambient air for three workers. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The hip-mounted PAS Colt SAR is one of the most technologically advanced short duration and emergency escape units available.

The PAS Micro is a NIOSH-approved SCBA that includes a back-mounted cylinder for 15 minutes of emergency air supply. With an SAR attachment it can be used up to 300’ from an air source.

The system provides a portable source of ambient air for two workers. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The Panther pressure-demand SAR provides the highest level of protection, ease of operation and user comfort.

The PentAir continuous flow supplied air respirator offers quality, comfort and economy in one design.

The Vortex Cooling Assembly cools hot and humid air by as much as 30 degrees F. Cool hot and humid ambient air by as much as 30 degrees F.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

The Conversion Kit quickly converts an Opti-Fit Full Facepiece APR into a mask compatible with a supplied air respirator.

The Full Mask Respirator is made of silicone rubber and will hold its shape in extreme hot and cold environments. Features a double-sealing flange, deep chin pocket, a replaceable, distortion-free polycarbonate lens with antifog, antiscratch coating and a comfortable, removable hairnet.

The High-Pressure Supplied Air Mask can be used with an SAR that has a range of 20 to 110 psi. It is ideal for use with air filtration panels in conjunction with compressors or plant-supplied compressed air.

The system provides ambient air to one worker. Comes complete with Tyvek hood, hose, and an ambient air pump. The lightweight disposable hood is loose-fitting, making it especially comfortable for bearded workers.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

Heavy-Duty Airline Hoses are critical components for any supplied air respirator system.

The low-pressure disposable Double Bib Hard Hat Hood is designed with enough space to accommodate a hard hat.

The Maintenance-Free Double-Bib Hood Assembly is designed with the breathing tube (with low-pressure flow adapter) and head suspension completely integrated in a convenient one-piece disposable hood assembly.

The disposable Poly-Coated Hood is resistant to liquids and ideal for use with spray paint. It is designed with the breathing tube and head suspension integrated in a convenient one-piece disposable Hood Assembly.

The positive pressure of a Supplied Air Hood provides greater wearer protection than negative pressure and eliminates the need for fit testing. The lightweight hood provides a loose, comfortable fit and features a ratchet suspension that can be easily adjusted through the hood with a simple turn of the knob.

This completely disposable hood allows the user to throw the entire respirator away after use. It comes with all the proven features of the Allegro hoods but, incorporates the use of fully disposable poly propylene material along with a disposable suspension and breathing air tube.

The Maintenance-Free Hood is designed with the breathing tube and head suspension completely integrated in a convenient one-piece disposable hood assembly.

The Low-Pressure Supplied Air Shield is ideal for use in grinding, chipping, spray painting, and auto body repair applications.

The High-Pressure Supplied Air Shield can be used with an SAR that has a range of 20 to 110 psi. It is ideal for use with air filtration panels in conjunction with compressors or plant-supplied compressed air.

CFM tester checks the volume of air that gets to the respirator. A flow meter simply quick connects onto an airline hose to check the respirator system for NIOSH compliant air flows.

Choose from a complete line of bayonet-style air purifying cartridges and filters. Easy to attach with a simple one-quarter turn.

Dräger X-plore® Rd40 filter series has a solution for nearly all hazardous gases, vapors and particles. The standard threaded connector in accordance to the EN 148-1 guarantees the upmost compatibility with Dräger Rd40 threaded half anf full face mask and powered air purifying respirators.