This high-quality nylon bag is designed to contain up to two sampling pumps with stands, cassettes, Impactors, and assorted paraphernalia for on-the-job air sampling.

Several Calibration Gas Cylinders are available to help ensure the accuracy of a gas detector.

Several Calibration Gas Cylinders are available to help ensure the accuracy of a gas detector.

The Demand Flow Gas Regulator is for use with a Calibration Gas Cylinder (sold separately).

Calibration Gas Regulators are for use with Calibration Gas Cylinders (sold separately).

The MicroDock II is a test and calibration docking station compatible with Honeywell X5 and XD Portable Gas Detectors. It offers an easy and cost-effective way to perform datalogging, calibration and bump testing. Numerous configurations available, please contact customer service for configuration and pricing information.

The Lumidor Enforcer Multigas Calibrator is a portable bump test and calibration docking station that provides a quick and easy way to calibrate Impact and Impact Pro multigas monitors fitted with oxygen, flammable gas, carbon monoxide and hydrogen sulfide sensors.

The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication of more than 700 monitors, all on one set of batteries. In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication. In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump. Calibration and Bump testing for QRAE II 1-4 gas confined space gas monitor.

The GammaRAE II Responder is really two instruments in one. It has the quick reponse of a radiation detector and the accurate measuring capability of a dosimeter.

To respond to a terrorist attack involving chemical weapons, you must first be able to detect the presence of toxic chemical agents quickly and accurately. An important new detection system, exclusively from Drager, will detect the presence of up to five different chemical agents simultaneously in just five minutes.

Allegro’s Flow Meter is designed to be separate from the air sampling pump. This allows the user to use the same Flow meter to set the flow for more than one pump.

The Clandestine Lab Simultest Kit is designed to detect the presence of the five dangerous gases most often encountered by law enforcement and first responders when they first enter the illegal laboratories used in the production of methamphetamine.

Use the HAZMAT Simultest Kit when initially assessing potentially hazardous situations, structural fires and organic chemical families.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication.

The accuro is a hand-operated bellows pump designed for use with all Drager short term air sampling tubes, is made of corrosion-resistant materials and never needs lubrication. A scissors mechanism ensures a uniform pump stroke, delivering 100 cc's of sample air. Includes a built-in stroke counter and an end-of-stroke indicator.

The D-2 Moldite Sampler is a lightweight, low-maintenance, high-efficiency linear oscillating pump designed to sample air for mold, using all types of mold cassettes, as well as impactors.

Model LP-1200 is a precision, hand-operated piston pump for drawing gas samples into detection tubes.

The maintenance-free pulsating Diaphragm Pump provides reliable constant air monitoring in atmospheres that may contain dangerous particulates.

The accuro 2000 is a battery powered gas detector pump that is used in combination with the accuro pump allowing "hands-free" operation of the Dräger-Tube System.

Diffusion Tubes sample ambient air by gaseous diffusion with no pumps or moving parts. Obtain time-weighted average (TWA) measurements of exposure to toxic gases for periods of up to 8 hours.

A wide selection of cost-effective Colorimetric Gas Detection Tubes provides fast, on-the-spot measurements of many gases and vapors.

For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases.

The Draeger Hot-Pack Holder and Hot-Packs allow the use of Draeger-Tubes below the temperature stated in their instructions.

The 25mm, 0.45µm (±5.0µm) TEM Cassette is designed for asbestos final clearance testing. The cassette incorporate a 2" static conductive extension cowl and meets all applicable standards.

The M2 Multi-Mold Cassette is a disposable, two-sided sampling cassette for Indoor Air Quality (IAQ) sampling and analysis. Used with standard sampling pump and calibration equipment (not included), the M2 is a boon to both field and laboratory personnel.

This 37mm, MCE cassette is 0.8µm mixed cellulose ester and is specifically designed for lead sampling.

The high-quality PCM Cassette is a 25mm cassette with 0.8µm pore size for asbestos sampling. It incorporates a 2" cowl and meets stringent quality standards.

Maximize the effectiveness and efficiency of all Drager Gas Monitors with Gas Monitoring Software. Data offers the possibility of detailed analysis, by means of which existing safety measures in place can be controlled as well as the function and application of the gas measuring devices can be checked and tested.

Safelink joins a pair of Impact Pro Detectors together, which allows for remote monitoring of a coworker in a confined space.

Transforms a portable Drager X-am® 5000 or 5600 Personal Gas Detector (sold separately) into a fixed system area monitoring device. Place a detector inside the X-zone 5000 and place it in an area where gas hazards exist. X-zone Monitors establish wireless communication with one another, allowing for the monitoring of large work areas. Note: The X-zone 5000 is an extremely complex system. Please call the experts at Gen-El to discuss your application and learn more about how the X-zone 5000 works.

The Dräger Bump Test Station allows a function (bump) test to be performed with a test gas in order to check the warning functions of gas detection instruments.

The IQ Express is a fully automated bump test and calibration station for the ToxiPro™ and ToxiLtd™ personal gas detectors. With the IQ Express, compliance recordkeeping efficiency and accuracy are dramatically improved.

Fully automated bump test and calibration station for the MultiPro gas detector. Improves compliance record-keeping accuracy and efficiency dramatically.

Simplify the calibration and management of MiniWarn, Multiwarn II and Pac III gas detectors with a system so efficient it will quickly pay for itself. Simply place the instruments in their respective calibration modules and click the “Go” button.

http://www.draeger.com/US/en_US/products/gas_detection/portable/calibration_testing/cin_e-cal.jsp?showBackButton=true

XXS DrägerSensors are extremely small, but they handle a big job. The sensors are an integral part of Dräger Gas Monitors, and their miniature design greatly reduces weight and volume.

The sensor is the heart of any gas detection instrument. Dräger eXtra Stability (XS) sensors provide outstanding performance. The XS sensors offer the longest warranties in the industry.

The Cat Ex 125 Sensor measures the levels of combustible gases and vapors in ambient air.

Electrochemical (EC) sensors used in portable multigas detectors must be warmed up and allowed to reach an electrical stability to provide their best performance. An ammonia (NH3) sensor can take at least 24 hours to stabilize. A carbon monoxide (CO) sensor can be ready in 10 minutes, but in the presence of lethal CO, even that is too long. The SensorRAE Sensor Conditioning Station keeps EC sensors warmed up and ready to install into an RAE multigas detector at a moment’s notice.

Each Biosystems "Smart Sensor" is individually equipped with its own EEPROM memory chip. Besides storing information such as type, serial number and alarm settings, the chip also stores calibration adjustments and sensor-specific temperature compensation curves.

Enhance your Impact and Impact Pro Multigas Monitor with several available accessories.

The EntryRAE includes sensors that detect and measure O2, CO, H2S and combustibles, plus a photoionization detector (PID) for the detection of volatile organic compounds (VOC’s). The self-cleaning PID provides 0-999 ppm measurement of total VOC’s with 1 ppm resolution.

The MultiRAE IR combines plug-in “smart” toxic gas sensors, a nondispersive infrared (NDIR) sensor and a photoionization detector (PID) to detect and measure LEL, O2, H2S (or CO), CO2 and volatile organic compounds (VOCs).

The versatile MultiRAE PLUS can be configured from a simple, inexpensive O2/LEL monitor to an affordable four-gas monitor plus PID for total protection in toxic environments.

The ppbRAE is a handheld photoionization detector (PID) capable of true parts-per-billion (ppb) detection of extremely low level, low vapor pressure and highly toxic Volatile Organic Compounds (VOCs) like chemical warfare agents and pesticide residues.

The MiniRAE 3000 is an extremely advanced handheld VOC monitor. It includes a photoionization detector (PID) with an extended range of 0-15,000 ppm that makes it ideal for industrial hygiene, leak detection, and hazmat detection.

The MiniRAE 2000 is a Photo-Ionization Detector (PID) 3-D sensor for detecting and measuring levels of volatile organic compounds (VOC). Operates over an extended range of 0-10,000 ppm with increased sensitivity and improved linearity.

The Cannonball3 Multigas Detector detects multiple gases in different combinations using user-replaceable sensors: LEL, O2, CO/H2S (using the Duo-Tox two-channel sensor), and SO2. Simple one-button operation and one-button calibration make the unit easy to use.